Description
Schneider Electric PM5000 series PM5330 Meter, modbus, up to 31st H, 256K 2DI/2DO 35 alarms
This device is a flush-mount energy meter with a 96mm by 96mm backlit LCD display. The meter provides Class 0.5S accuracy per IEC 62053-22 standard and 64 samples per cycle. The meter will measure Energy, Active and Reactive Power, Voltage, Current, Frequency, Power Factor and up to the 31st Harmonic. Include 256 kiloBytes of memory for two fixed parameters, active and reactive energy. The meter will function in a 50Hz or 60Hz network and accepts supply voltage ranging from 100 to 415 VAC and 125 to 250 VDC. Line rated current for this meter is 1A or 5A input and will support Single Phase and Neutral, Three Phase, or Three Phase and Neutral configurations. The range of measurement voltage between Phases is 35 to 690 VAC at 47 to 63 Hz. Measurement range between Phase and Neutral is 20 to 400VAC at 47 to 63 Hz. Communication protocol is Modbus RTU and ASCII 2 wires with RS485 port support. The meter also has two digital inputs or digital outputs, configurable, and dual relay outputs. There are 35 configurable alarms and it supports four tariff schedules. Product dimensions are as follows: width 3.78 inches (96 millimetres), depth 2.83 inches (72 millimetres), height 3.78 inches (96 millimetres) and product weight 15.2 onces (430 g).
Technical Specifications
Looking for something specific? Search with keywords to help filter your required specifications.
Relative humidity | 5-95 % at 50-50 °C non-condensing |
[Us] rated supply voltage | 100...300 V DC |
Frequency measurement range | 45-65 Hz |
Data recording | alarm logs |
Mount | Flush |
Electromagnetic compatibility | voltage dips and interruptions immunity test class B conforming to IEC 61000-4-11 |
Ambient air temperature for operation | -25-70 °C meter |
Communication port support | RS485 |
Mounting mode | flush-mounted |
Number of outputs | 2 digital |
Connection Type | RJ45 |
Supplier Code | METSEPM5330 |
Ambient air temperature for storage | -40-85 °C |
Network frequency | 50 Hz |
Analogue input type | current (impedance <= 0.3 mOhm) |
Maximum power consumption in VA | 11 VA at 415 V |
Communication port protocol | JBUS |
IP degree of protection | IP30 rear: conforming to IEC 60529 |
Range | PowerLogic |
Weight | 430g |
Item Name | Power Meter |
Memory capacity | 256 kB |
Pollution degree | 2 |
Measurement accuracy | active power +/- 0.5 % |
Display resolution | 128 x 128 pixels |
Market segment | buildings large building cost management: cost allocation: sub feeder |
Connections - terminals | Ethernet network: RJ45 connector |
Standard | IEC 60529 |
Accuracy class | class 0.5S active energy conforming to IEC 62053-22 |
[In] rated current | 5 A |
Depth | 72mm |
Mounting support | framework |
Type of measurement | active and reactive power |
Voltage | 125 - 250V |
Power quality analysis | up to the 31st harmonic |
Height | 96mm |
Measurement current | 5-8500 mA |
Poles description | 3P |
Number of inputs | 2 digital |
Width | 96mm |
Operating altitude | 3000 m CAT II |
Ride-through time | 100 ms 415 V AC typical |
Display type | monochrome graphic LCD |
Device short name | PM5330 |
Compatibility code | PM5330 |
Information displayed | tariff (4) |
Device application | multi-tariff |
Measurement voltage | 20-400 V AC 45...65 Hz between phase and neutral |
Standards | IEC 60529 |
Brand Name | Schneider Electric |
Product certifications | cULus conforming to UL 61010-1 |
IP Rating | IP30 |
Product name | PowerLogic PM5000 |
Sampling rate | 64 samples/cycle |
Frequency | 60Hz |
Net weight | 430 g |
Product or component type | power meter |
Have questions about this product?
Do you need more information? We are here to help. Click below to contact us now!
Get in touchWe would love your opinion
Was the information on this page helpful?
Thanks for your feedback!
We can source just about anything, submit a request and we'll get back to you soon.