Schneider A9E18032 Acti9 iPB Push Button, Single, 1 N/O Contact, Din Rail Mount, 1 Module, Grey Button, 71mm x 82mm x 18mm

This Acti 9 iPB is a modular pusbutton used to control electric circuits by means of pulses. It is a single normaly open contact (NO). The push-button is grey. The phase-separated wall can be divided to allow all the types of com busbar to pass through. It comes with staggered terminals to simplify connection. The tightening torque of connection is 1N.m for PZ1. The Ue rated operational voltage is 250VAC. The Ie rated operational current is 20A. The operating frequency is 50Hz. The connection allows rigid copper cables from 0.5mm minimum to 2x2.5mm maximum. The connection allows flexible or with ferrule copper cables from 0.5mm minimum to 2x2.5mm maximum. The number of cycles open and close (O-C) is 30000. The endurance is 30000 operations with AC22 current category under cos phi0.8. The width in 9mm pitches is 2. The dimensions are (W) 18mm x (H) 82mm x (D) 71mm. The pollution degree is 3. The tropicalization is treatment 2 (relative humidity 95% at 55C). The operational temperature is from -35C to 70C. The storage temperature is from -40C to 80C. It complies with IEC 60669-1 and IEC 60947-5-1 standards.