Schneider Electric ATS22D17Q Soft starter, Altistart 22, ATS22 control 220V power 230V(4kW)/400...440V(7.5kW)
Code: SCHATS22D17Q
Unit of measure:
EACH
Description
SOFT STARTER &STOP 17A 7.5KW 415V 3P
Technical Specifications
Looking for something specific? Search with keywords to help filter your required specifications.
| Product destination | asynchronous motors |
| Relative humidity | 0-95 % without condensation or dripping water conforming to IEC 60068-2-3 |
| [Us] rated supply voltage | 230...440 V - 15...10 % |
| Discrete input voltage | 24 V <= 30 V |
| Operating position | vertical +/- 10 degree |
| Electromagnetic compatibility | immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3 |
| Ambient air temperature for operation | 40-60 °C (with current derating 2.2 % per °C) |
| Connector type | 1 RJ45 |
| Minimum switching current | 100 mA at 12 V DC (relay outputs) |
| Noise level | 45 dB |
| Supplier ref | ATS22D17Q |
| Installed device | 31 |
| Motor starter type | soft starter |
| Supplier Code | ATS22D17Q |
| Component name | ATS22 |
| Supply voltage limits | 195-484 V |
| Ambient air temperature for storage | -25-70 °C |
| Discrete output type | relay outputs R2 230 V running- alarm- trip- stopped- not stopped- starting- ready C/O |
| Network frequency | 45...66 Hz |
| Power dissipation in W | 39 W for standard applications |
| PTC probe input | 750 Ohm |
| Vibration resistance | 1.5mm (f= 2-13 Hz) conforming to IEC 60068-2-6 |
| Communication data link | serial |
| Discrete input number | 3 |
| Network number of phases | 3 phases |
| Function available | internal bypass |
| Protection type | thermal protection: starter |
| Shock resistance | 15 gn for 11 ms conforming to IEC 60068-2-27 |
| Motor power kW | 7.5 kW 440 V |
| Device connection | to the motor delta terminals |
| Communication port protocol | Modbus |
| IP degree of protection | IP20 |
| Range | Altistart 22 |
| Assembly style | with heat sink |
| Pollution degree | level 2 conforming to IEC 60664-1 |
| Output current | 0.4...1 Icl adjustable |
| Power range | 7-11 kW at 380-440 V 3 phases |
| Product specific application | pumps and fans |
| Control circuit consumption | 20 W |
| Factory setting current | 14.8 A |
| IcL starter rating | 17 A for connection in the motor supply line for standard applications |
| Discrete input logic | positive logic LI1- LI2- LI3 at State 0: < 5 V and <= 2 mA at State 1: > 11 V- >= 5 mA |
| Depth | 169mm |
| Type of start | start with torque control (current limited to 3.5 In) |
| Maximum switching current | 2 A 30 V DC inductive 7 ms relay outputs |
| Height | 265mm |
| Width | 130mm |
| Operating altitude | > 1000...< 2000 m with current derating of 2.2 % per additional 100 m |
| Type of cooling | forced convection |
| [Uc] control circuit voltage | 230 V - 15...10 % 50/60 Hz |
| Discrete output number | 2 |
| Marking | CE |
| Standards | IEC 60947-4-2 |
| Product certifications | C-Tick |
| Brand Name | Schneider Electric |
| Supply frequency | 50...60 Hz - 10...10 % |
| Utilisation category | AC-53A |
| Discrete input type | (LI1- LI2- LI3) logic- 5 mA 4.3 kOhm |
| Net weight | 7 kg |
| Transmission rate | 4800- 9600 or 19200 bps |
| Physical interface | RS485 multidrop |
| Product or component type | soft starter |
Select products - now easier than ever
Discover our Product Selector tool to easily choose the products you need, in just a few clicks.
Launch Product selector Learn more
Have questions about this product?
Do you need more information? We are here to help. Click below to contact us now!
Get in touchWe would love your opinion
Was the information on this page helpful?
Thanks for your feedback!
Can't find what you're looking for?
Request now
We can source just about anything, submit a request and we'll get back to you soon.