Description
This Altivar 320 variable speed drive can feed 3-phase synchronous and asynchronous motors. Its book form factor allows for a simple and compact installation in your automation cabinets. It works at a rated power up to 1.5kW / 2hp and a rated voltage from 380V to 500V AC. Its robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards allows to extend machine availability in harsh environmental conditions, for example at ambient temperatures of up to 60°C without the need of additional cooling. It incorporates functions suitable for the most common applications, including torque and speed accuracy at very low speed, high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors. It also incorporates parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors. The drive software includes 5 safety functions that help machines meet safety requirements, whether or not they are used in conjunction with a Preventa safety module. These safety functions are configured using SoMove software. Altivar Machine ATV320 was designed for Original Equipment Manufacturers (OEMs) that meets simple and advanced application requirements covered for packaging, material handling, textile, material working, mechanical actuators and hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions). It is also CE, UL, CSA, NOM, EAC and RCM certified. Mounting accessories and external options (braking resistors, line chokes, motor chokes, additional EMC filters) are available with Altivar Machine ATV320 drives. The type of external accessories and options depends on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV320 drives directly in SoMachine and SoMove software by means of the same software brick (DTM). It complies with directives such as RoHS, WEEE, etc.relating to environmental protection.
Features:
• Reference contains Substances of Very High Concern above the threshold
•
•
•
•
•
•
•
•
Technical Specifications
Looking for something specific? Search with keywords to help filter your required specifications.
| With safety function Safe brake management (SBC/SBT) | false |
| With safety function Safe Speed Monitor (SSM) | false |
| Maximum deflection under vibratory load (during operation) | 1.5mm at 2...13 Hz |
| Line current | 4.9 A at 500 V (heavy duty) |
| Environmental class (during storage) | class 1S2 according to EN 60721-3 |
| Supporting protocol for Data-Highway | false |
| Operating element present | true |
| Ambient air temperature for operation | 50-60 °C with derating factor |
| Minimum switching current | relay output R1A- R1B- R1C- R2A- R2C: 5 mA at 24 V DC |
| Supporting protocol for EtherNet/IP | true |
| Switching frequency | 4...16 kHz with derating factor |
| Analogue output type | software-configurable voltage AQ1: 0...10 V DC impedance 470 Ohm- resolution 10 bits |
| Ambient air temperature for storage | -25-70 °C |
| Number of input phases | 3 |
| Discrete output type | open collector DQ- 0-1 kHz 30 V DC 100 mA |
| Apparent power | 4.2 kVA at 500 V (heavy duty) |
| Power dissipation in W | fan: 56.0 W at 380 V- switching frequency 4 kHz |
| Sampling duration | 2 ms (AQ1) - analog output |
| Brake chopper integrated | true |
| Discrete input number | 7 |
| Protection type | overcurrent between output phases and earth: drive |
| Encoder protocol | RS 422 |
| Relative symmetric mains voltage tolerance | 10 % |
| Motor power kW | 1.5 kW for heavy duty |
| Supporting protocol for DeviceNet | true |
| With safety function Safely Limited Position (SLP) | false |
| Supporting protocol for INTERBUS-Safety | false |
| Supporting protocol for Foundation Fieldbus | false |
| Supporting protocol for PROFINET IO | true |
| Variant | standard version |
| Application in domestic and commercial area permitted | false |
| Computer port | true |
| Maximum input current | 6.5 A |
| 4 quadrant operation possible | true |
| Volume | 7328.750 cm3 |
| Option card | communication module- Profibus DP V1 |
| Pollution degree | 2 |
| Prospective line Isc | 5 kA |
| Number of HW interfaces serial RS232 | 0.0 |
| With sft fct Safe Stop 2 (SS2) | false |
| Supporting protocol for TCP/IP | true |
| Permitted relative humidity (during transport) | class 2K5 according to EN 60721-3 |
| With safety function Safely Limited Speed (SLS) | true |
| Number of HW interfaces serial TTY | 0.0 |
| Product specific application | complex machines |
| Discrete input logic | negative logic (sink) |
| With safety function Safe torque off (STO) | true |
| Depth | 245.0mm |
| Application in industrial area permitted | true |
| Supporting protocol for INTERBUS | false |
| Design of frequency changer | U converter |
| Volume of cooling air | 9.4 m3/h |
| Supporting protocol for LON | false |
| Linearity error | AQ1: +/- 0.3 % for analog output |
| Housing material | plastic |
| Number of output phases | 3 |
| Maximum deflection under vibratory load (during transport) | 3.5mm at 2...13 Hz |
| Width | 45.0mm |
| Supporting protocol for SafetyBUS P | false |
| Ambient air transport temperature | -25-70 °C |
| Capacity of DC link | 220 µF |
| Nominal output current | 4.1 A |
| NEMA degree of protection | not applicable |
| Power loss static current independent | 56.0 W |
| Maximum acceleration under vibratory load (during storage) | 10 m/s² at 13...200 Hz |
| Method of access | slave CANopen |
| Permitted relative humidity (during operation) | class 3K5 according to EN 60721-3 |
| Maximum output voltage | 500 V |
| Speed accuracy | +/- 10 % of nominal slip 0.2 Tn to Tn |
| Analogue output number | 1 |
| Supporting protocol for BACnet | false |
| Number of HW interfaces parallel | 0.0 |
| Motor slip compensation | adjustable 0...300 % |
| Environmental class (during operation) | class 3S2 according to IEC 60721-3-3 |
| Analogue input number | 3 |
| Number of inputs- potential-free | 0 |
| Length | 32.500 cm |
| Discrete input type | DI5 programmable as pulse input: 0-30 kHz- 24 V DC (30 V) |
| Net weight | 2.5 kg |
| Synchronous motor control profile | vector control without sensor |
| Refresh time | relay output (R2A- R2C): 2 ms |
| Asynchronous motor control profile | voltage/frequency ratio - Energy Saving- quadratic U/f |
| Supporting protocol for DeviceNet Safety | false |
| Supporting protocol for SUCONET | false |
| EMC filter | Class C2 EMC filter integrated |
| [Us] rated supply voltage | 380...500 V - 15...10 % |
| With safety function Safe Stop 1 (SS1) | true |
| Operating position | vertical +/- 10 degree |
| Supporting protocol for ASI | false |
| Electromagnetic compatibility | conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 |
| Permitted relative humidity (during storage) | class 1K5 according to EN 60721-3 |
| Nominal switching frequency | 4 kHz |
| Supporting protocol for KNX | false |
| Environmental class (during transport) | class 2S1 according to EN 60721-3 |
| With safety function Safe Direction (SDI) | false |
| Number of HW interfaces USB | 0.0 |
| Relative symmetric network frequency tolerance | 5 % |
| Mounting mode | cabinet mount |
| Supplier Code | ATV320U15N4B |
| Number of HW interfaces serial RS422 | 0.0 |
| GrosWeight | 2.330 kg |
| Supporting protocol for SERCOS | false |
| Network frequency | 50...60 Hz |
| With safety function Safe Operating Stop (SOS) | false |
| Supporting protocol for other bus systems | true |
| Network number of phases | 3 phases |
| With safety function Safe Position (SP) | false |
| Analogue input type | AI2 bipolar differential voltage: +/- 10 V DC- impedance: 30 kOhm- resolution 10 bits |
| Maximum acceleration under shock load (during transport) | 150 m/s² at 11 ms |
| Communication port protocol | Modbus serial |
| IP degree of protection | IP20 |
| Range | Altivar Machine ATV320 |
| Overvoltage category | III |
| Optical interface present | false |
| Number of inputs- bidirectional- not potential-free | 0 |
| EMC limit value (complied) | true |
| 1 phase low current possible | false |
| Acceleration and deceleration ramps | acceleration/deceleration automatic stop with DC injection |
| Nominal output power | 1.5 kW |
| Maximum acceleration under vibratory load (during transport) | 10 m/s² at 13...200 Hz |
| Base load current at high overload | 1.5 A |
| Accuracy | +/- 2 % AQ1 for a temperature of -10...60 °C analog output |
| Supporting protocol for CAN | true |
| Power loss per device current dependent | 56.0 W |
| Supporting protocol for PROFINET CBA | false |
| Maximum switching current | relay output R1A- R1B- R1C- R2A- R2C on inductive load- cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC |
| Height | 325.0mm |
| Number of HW interfaces serial RS485 | 1.0 |
| Relay output type | configurable relay logic R1B 1 NC electrical durability 100000 cycles |
| Maximum acceleration under vibrational stress (during operation) | 10 m/s² at 13...200 Hz |
| Supporting protocol for PROFIBUS | true |
| Number of HW interfaces PROFINET | 0.0 |
| Regulation loop | adjustable PID regulator |
| Maximum output frequency | 0.599 kHz |
| Number of HW interfaces other | 1.0 |
| Format of the drive | book |
| Discrete output number | 3 |
| Maximum associated fuse rating | 12.0 A |
| Marking | ATEX |
| Maximum deflection under vibratory load (during storage) | 3.5mm at 2...13 Hz |
| Supporting protocol for PROFIsafe | false |
| Standards | IEC 61800-5-1 |
| With safety function Safe programmable logic | false |
| Product certifications | NOM |
| Brand Name | Schneider Electric |
| Braking to standstill | by DC injection |
| Maximum acceleration under shock impact (during operation) | 150 m/s² at 11 ms |
| Supporting protocol for AS-Interface Safety at Work | false |
| Number of HW interfaces industrial Ethernet | 0.0 |
| Supporting protocol for MODBUS | true |
| Transient overtorque | 170-200 % of nominal motor torque |
| Maximum acceleration under shock load (during storage) | 150 m/s² at 11 ms |
| Product or component type | variable speed drive |
Select products - now easier than ever
Discover our Product Selector tool to easily choose the products you need, in just a few clicks.
Launch Product selector Learn more
Have questions about this product?
Do you need more information? We are here to help. Click below to contact us now!
Get in touchWe would love your opinion
Was the information on this page helpful?
Thanks for your feedback!
We can source just about anything, submit a request and we'll get back to you soon.