Schneider Electric ATV650U15N4 variable speed drive, Altivar Process ATV600, ATV650, 1.5kW, 400 to 480V, IP55
Code: SCHATV650U15N4
Unit of measure:
EACH
Description
VARIABLE SPEED DRIVE IP55 1.5KW 400V/480
Technical Specifications
Looking for something specific? Search with keywords to help filter your required specifications.
| Product destination | asynchronous motors |
| With safety function Safe brake management (SBC/SBT) | false |
| Relative humidity | 5-95 % without condensation conforming to IEC 60068-2-3 |
| Data format | 8 bits- configurable odd- even or no parity |
| With safety function Safe Speed Monitor (SSM) | false |
| Maximum deflection under vibratory load (during operation) | 1.5mm at 2...13 Hz |
| Line current | 0.9 A at 380 V (heavy duty) |
| Environmental class (during storage) | class 1S2 according to EN 60721-3-1 |
| Supporting protocol for Data-Highway | false |
| Operating element present | true |
| Ambient air temperature for operation | -15-40 °C (without derating) |
| Connector type | RJ45 (on the remote graphic terminal) for Ethernet/Modbus TCP |
| Minimum switching current | relay output R1- R2- R3: 5 mA at 24 V DC |
| Electrical connection | motor: screw terminal 4...6mm²/AWG 12...AWG10 |
| Supporting protocol for EtherNet/IP | true |
| Switching frequency | 2...12 kHz adjustable |
| Analogue output type | software-configurable current AQ1- AQ2: 0...20 mA- resolution 10 bits |
| Motor starter type | variable speed drive |
| Output voltage | <= power supply voltage |
| Ambient air temperature for storage | -40-70 °C |
| Number of input phases | 3 |
| Number of addresses | 1-247 for Modbus serial |
| Discrete output type | relay outputs R1A- R1B- R1C 30 V DC 3000 mA |
| Apparent power | 2.2 kVA at 480 V (normal duty) |
| Frequency resolution | display unit: 0.1 Hz |
| Exchange mode | half duplex- full duplex- autonegotiation Ethernet/Modbus TCP |
| Sampling duration | 10 ms +/- 1 ms (AO1) - analog output |
| Brake chopper integrated | false |
| Discrete input number | 8 |
| Protection type | short-circuit protection: drive |
| Relative symmetric mains voltage tolerance | 10 % |
| Motor power kW | 1.5 kW (normal duty) |
| Supporting protocol for DeviceNet | false |
| Quantity per set | 1 |
| With safety function Safely Limited Position (SLP) | false |
| Permissible temporary current boost | 1.1 x In during 60 s (normal duty) |
| Supporting protocol for INTERBUS-Safety | false |
| Supporting protocol for Foundation Fieldbus | false |
| Supporting protocol for PROFINET IO | true |
| Variant | standard version |
| Application in domestic and commercial area permitted | false |
| Computer port | true |
| Maximum input current | 3.0 A |
| 4 quadrant operation possible | false |
| Local signalling | 1 LED (red) for presence of voltage |
| Option card | slot A: communication module- CANopen daisy chain RJ45 |
| Pollution degree | 2 conforming to IEC 61800-5-1 |
| Prospective line Isc | 50 kA |
| Number of HW interfaces serial RS232 | 0 |
| With sft fct Safe Stop 2 (SS2) | false |
| Supporting protocol for TCP/IP | true |
| Permitted relative humidity (during transport) | class 2K5 according to EN 60721-3 |
| With safety function Safely Limited Speed (SLS) | false |
| Number of HW interfaces serial TTY | 0 |
| Discrete and process manufacturing | building - HVAC compressor centrifugal |
| Supply | external supply for digital inputs: 24 V DC (19-30 V)- <1.25 mA- protection type: overload and short-circuit protection |
| Input compatibility | STOA- STOB: discrete input level 1 PLC conforming to IEC 61131-2 |
| Product specific application | process and utilities |
| Enclosure mounting | wall mounted |
| Discrete input logic | negative logic (sink) (DI1...DI8)- > 16 V (state 0)- < 10 V (state 1) |
| With safety function Safe torque off (STO) | true |
| Depth | 272mm |
| Application in industrial area permitted | true |
| Supporting protocol for INTERBUS | false |
| Design of frequency changer | U converter |
| Supporting protocol for LON | false |
| Linearity error | AI1- AI2- AI3: +/- 0.15 % of maximum value for analog input |
| Housing material | plastic |
| Number of output phases | 3 |
| Maximum deflection under vibratory load (during transport) | 1.5mm at 2...13 Hz |
| Width | 264mm |
| Supporting protocol for SafetyBUS P | false |
| Ambient air transport temperature | -40-70 °C |
| Operating altitude | <= 1000 m without derating |
| Capacity of DC link | 235.0 µF |
| Nominal output current | 4.0 A |
| Device short name | ATV650 |
| NEMA degree of protection | NEMA 1 |
| Power loss static current independent | 14.0 W |
| Maximum acceleration under vibratory load (during storage) | 10 m/s² at 13...200 Hz |
| Method of access | slave Modbus TCP |
| Permitted relative humidity (during operation) | class 3K5 according to EN 60721-3 |
| Maximum output voltage | 480.0 V |
| Analogue output number | 2 |
| Relay output number | 3 |
| Supporting protocol for BACnet | false |
| Number of HW interfaces parallel | 0 |
| Transmission frame | RTU |
| Motor slip compensation | adjustable |
| Supply frequency | 50...60 Hz - 5...5 % |
| Environmental class (during operation) | class 3S3 according to IEC 60721-3-3 |
| Analogue input number | 3 |
| Number of inputs- potential-free | 0 |
| Discrete input type | DI7- DI8 programmable as pulse input: 0-30 kHz- 24 V DC (<= 30 V) |
| Transmission rate | 4800 bps- 9600 bps- 19200 bps- 38.4 Kbps |
| Net weight | 10.5 kg |
| Specific application | utility |
| Synchronous motor control profile | permanent magnet motor |
| Refresh time | relay output (R1- R2- R3): 5 ms (+/- 0.5 ms) |
| Asynchronous motor control profile | constant torque standard |
| Supporting protocol for DeviceNet Safety | false |
| Supporting protocol for SUCONET | false |
| Maximum THDI | <48 % full load conforming to IEC 61000-3-12 |
| EMC filter | integrated with 150 m conforming to IEC 61800-3 category C3 |
| [Us] rated supply voltage | 380...480 V - 15...10 % |
| With safety function Safe Stop 1 (SS1) | false |
| Operating position | vertical +/- 10 degree |
| Supporting protocol for ASI | false |
| Electromagnetic compatibility | electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 |
| Maximum transient current | 4.4 A during 60 s (normal duty) |
| Permitted relative humidity (during storage) | class 1K5 according to EN 60721-3 |
| Nominal switching frequency | 4 kHz |
| Supporting protocol for KNX | false |
| Noise level | 52 dB |
| Environmental class (during transport) | class 2S1 according to EN 60721-3-2 |
| Base load current at low overload | 4.0 A |
| With safety function Safe Direction (SDI) | false |
| Number of HW interfaces USB | 0 |
| Relative symmetric network frequency tolerance | 5 % |
| Mounting mode | wall mount |
| Supplier Code | ATV650U15N4 |
| Number of HW interfaces serial RS422 | 0 |
| Supporting protocol for SERCOS | false |
| Network frequency | 50...60 Hz |
| Type of polarization | no impedance |
| Vibration resistance | 1.5mm peak to peak (f= 2-13 Hz) conforming to IEC 60068-2-6 |
| With safety function Safe Operating Stop (SOS) | false |
| Supporting protocol for other bus systems | false |
| Network number of phases | 3 phases |
| With safety function Safe Position (SP) | false |
| Analogue input type | AI1- AI2- AI3 software-configurable current: 0...20 mA- impedance: 250 Ohm- resolution 12 bits |
| Shock resistance | 15 gn for 11 ms conforming to IEC 60068-2-27 |
| Maximum acceleration under shock load (during transport) | 150 m/s² at 11 ms |
| Insulation resistance | > 1 MOhm 500 V DC for 1 minute to earth |
| Communication port protocol | Modbus TCP |
| IP degree of protection | IP55 |
| Range | Altivar Process ATV600 |
| Overvoltage category | III |
| Optical interface present | false |
| Number of inputs- bidirectional- not potential-free | 0 |
| EMC limit value (complied) | true |
| 1 phase low current possible | false |
| Acceleration and deceleration ramps | linear adjustable separately from 0.01...9999 s |
| Nominal output power | 1.5 kW |
| Maximum acceleration under vibratory load (during transport) | 10 m/s² at 13...200 Hz |
| Power range | 1.1-2 kW at 380-440 V 3 phases |
| Base load current at high overload | 2.2 A |
| Accuracy | +/- 0.6 % AI1- AI2- AI3 for a temperature variation 60 °C analog input |
| Supporting protocol for CAN | true |
| Power loss per device current dependent | 74.0 W |
| Supporting protocol for PROFINET CBA | true |
| Maximum switching current | relay output R1- R2- R3 on inductive load- cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC |
| Height | 678mm |
| Number of HW interfaces serial RS485 | 1 |
| Relay output type | configurable relay logic R3: sequence relay NO electrical durability 100000 cycles |
| Maximum acceleration under vibrational stress (during operation) | 10 m/s² at 13...200 Hz |
| Supporting protocol for PROFIBUS | true |
| Continuous output current | 4 A at 4 kHz for normal duty |
| Number of HW interfaces PROFINET | 0 |
| Type of cooling | forced convection |
| Regulation loop | adjustable PID regulator |
| Maximum output frequency | 500 kHz |
| Number of HW interfaces other | 0 |
| Discrete output number | 0 |
| Maximum associated fuse rating | 8.0 A |
| Safety function | STO (safe torque off) SIL 3 |
| Marking | CE |
| Maximum deflection under vibratory load (during storage) | 1.5mm at 2...13 Hz |
| Supporting protocol for PROFIsafe | false |
| Standards | IEC 60721-3 |
| With safety function Safe programmable logic | false |
| Product certifications | ATEX INERIS |
| Brand Name | Schneider Electric |
| Braking to standstill | by DC injection |
| Maximum acceleration under shock impact (during operation) | 150 m/s² at 11 ms |
| Supporting protocol for AS-Interface Safety at Work | false |
| Motor power hp | 2 hp normal duty |
| Number of HW interfaces industrial Ethernet | 1 |
| Isolation | between power and control terminals |
| Supporting protocol for MODBUS | true |
| Physical interface | 2-wire RS 485 |
| Speed drive output frequency | 0.1-500 Hz |
| Maximum acceleration under shock load (during storage) | 150 m/s² at 11 ms |
| Product or component type | variable speed drive |
Select products - now easier than ever
Discover our Product Selector tool to easily choose the products you need, in just a few clicks.
Launch Product selector Learn more
Have questions about this product?
Do you need more information? We are here to help. Click below to contact us now!
Get in touchWe would love your opinion
Was the information on this page helpful?
Thanks for your feedback!
Can't find what you're looking for?
Request now
We can source just about anything, submit a request and we'll get back to you soon.