VARIABLE SPEED DRIVE 37KW 50HP 415V 3P | DOL Starter | Motor Control | Industrial | All Categories

Schneider Electric ATV630D37N4 variable speed drive, Altivar Process ATV600, ATV630, 37kW, 50hp, 380 to 480V, IP21, UL type 1

Code: SCHATV630D37N4

Brand: Schneider Electric

Unit of measure: EACH

Description

Schneider ATV630D37N4 Altivar Process ATV600/630 Series Variable Speed Drive, VSD, 37kw (50hp), 415V, 57.3A Normal Duty, Three Phase, IP21, 226mm x 673mm x 271mm

Technical Specifications

Looking for something specific? Search with keywords to help filter your required specifications.

With safety function Safe brake management (SBC/SBT)	false
Relative humidity	5-95 % without condensation conforming to IEC 60068-2-3
Data format	8 bits- configurable odd- even or no parity
Maximum deflection under vibratory load (during operation)	1.5mm at 2...13 Hz
Environmental class (during storage)	class 1S2 according to EN 60721-3-1
Supporting protocol for Data-Highway	false
Ambient air temperature for operation	50-60 °C (with derating factor)
Number of addresses	1-247 for Modbus serial
Frequency resolution	analog input: 0.012/50 Hz
Sampling duration	5 ms +/- 0.1 ms (AI1- AI2- AI3) - analog input
Brake chopper integrated	false
Supporting protocol for DeviceNet	false
Supporting protocol for Foundation Fieldbus	false
Computer port	true
Local signalling	1 LED (red) for presence of voltage
With safety function Safely Limited Speed (SLS)	false
Number of HW interfaces serial TTY	0
Discrete and process manufacturing	oil and gas water injection pump
Input compatibility	STOA- STOB: discrete input level 1 PLC conforming to IEC 61131-2
Product specific application	process and utilities
Enclosure mounting	wall mounted
Supporting protocol for INTERBUS	false
Volume of cooling air	240 m3/h
Housing material	plastic
Supporting protocol for SafetyBUS P	false
Capacity of DC link	2500.0 µF
Nominal output current	74.5 A
Maximum acceleration under vibratory load (during storage)	10 m/s² at 13...200 Hz
Permitted relative humidity (during operation)	class 3K5 according to EN 60721-3
Maximum output voltage	480.0 V
Relay output number	3
Number of HW interfaces parallel	0
Transmission frame	RTU
Motor slip compensation	can be suppressed
Supply frequency	50...60 Hz - 5...5 %
Discrete input type	DI7- DI8 programmable as pulse input: 0-30 kHz- 24 V DC (<= 30 V)
Synchronous motor control profile	synchronous reluctance motor
Refresh time	relay output (R1- R2- R3): 5 ms (+/- 0.5 ms)
Supporting protocol for DeviceNet Safety	false
[Us] rated supply voltage	380...480 V - 15...10 %
Supporting protocol for ASI	false
Electromagnetic compatibility	conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Maximum transient current	82 A during 60 s (normal duty)
Nominal switching frequency	4 kHz
Number of HW interfaces USB	0
Relative symmetric network frequency tolerance	5 %
Mounting mode	wall mount
Number of HW interfaces serial RS422	0
Supporting protocol for SERCOS	false
Type of polarization	no impedance
Shock resistance	15 gn for 11 ms conforming to IEC 60068-2-27
Insulation resistance	> 1 MOhm 500 V DC for 1 minute to earth
Communication port protocol	Modbus serial
Weight	28.2kg
EMC limit value (complied)	true
Maximum acceleration under vibratory load (during transport)	10 m/s² at 13...200 Hz
Power range	30-50 kW at 480-500 V 3 phases
Standard	UL 508C, EN/IEC 61800-3, environment 1 category C2 EN/IEC 61800-3, environment 2 category C3 EN/IEC 61800-3, EN/IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508 and IEC 13849-1
Power loss per device current dependent	1030.0 W
Supporting protocol for PROFINET CBA	true
Maximum acceleration under vibrational stress (during operation)	10 m/s² at 13...200 Hz
Continuous output current	61.5 A at 4 kHz for heavy duty
Regulation loop	adjustable PID regulator
Maximum associated fuse rating	125.0 A
Safety function	STO (safe torque off) SIL 3
Marking	CE
Maximum deflection under vibratory load (during storage)	1.5mm at 2...13 Hz
Product certifications	UL
Brand Name	Schneider Electric
Braking to standstill	by DC injection
Supporting protocol for AS-Interface Safety at Work	false
IP Rating	IP21
Product destination	synchronous motors
With safety function Safe Speed Monitor (SSM)	false
Line current	54.8 A at 380 V (heavy duty)
Operating element present	true
Connector type	RJ45 (on the remote graphic terminal) for Modbus serial
Minimum switching current	relay output R1- R2- R3: 5 mA at 24 V DC
Electrical connection	line side: screw terminal 35...50mm²/AWG 3...AWG 1
Supporting protocol for EtherNet/IP	true
Switching frequency	4...12 kHz with derating factor
Analogue output type	software-configurable current DQ-- DQ+: 100 mA
Motor starter type	variable speed drive
Output voltage	<= power supply voltage
Ambient air temperature for storage	-40-70 °C
Number of input phases	3
Discrete output type	relay outputs R2A- R2C 250 V AC 5000 mA
Apparent power	40.2 kVA at 480 V (heavy duty)
Power dissipation in W	forced convection: 796 W at 380 V- switching frequency 4 kHz
Exchange mode	half duplex- full duplex- autonegotiation Ethernet/Modbus TCP
Discrete input number	8
Protection type	motor phase break: motor
Relative symmetric mains voltage tolerance	10 %
Motor power kW	30 kW (heavy duty)
Quantity per set	1
With safety function Safely Limited Position (SLP)	false
Permissible temporary current boost	1.5 x In during 60 s (heavy duty)
Supporting protocol for INTERBUS-Safety	false
Supporting protocol for PROFINET IO	true
Variant	standard version
Noise Level	63.5 dB
Application in domestic and commercial area permitted	false
Item Name	Variable Speed Drive
Maximum input current	66.2 A
4 quadrant operation possible	false
Option card	slot A: communication module- DeviceNet
Pollution degree	2 conforming to IEC 61800-5-1
Prospective line Isc	50 kA
Number of HW interfaces serial RS232	0
With sft fct Safe Stop 2 (SS2)	false
Supporting protocol for TCP/IP	true
Permitted relative humidity (during transport)	class 2K5 according to EN 60721-3
Supply	internal supply for digital inputs and STO: 24 V DC (21-27 V)- <200 mA- protection type: overload and short-circuit protection
Discrete input logic	negative logic (sink) (DI1...DI8)- > 16 V (state 0)- < 10 V (state 1)
With safety function Safe torque off (STO)	true
Depth	271mm
Application in industrial area permitted	true
Design of frequency changer	U converter
Supporting protocol for LON	false
Linearity error	AO1- AO2: +/- 0.2 % for analog output
Number of output phases	3
Maximum deflection under vibratory load (during transport)	1.5mm at 2...13 Hz
Width	226mm
Ambient air transport temperature	-40-70 °C
Operating altitude	1000...4800 m with current derating 1 % per 100 m
Device short name	ATV630
NEMA degree of protection	NEMA 1
Power loss static current independent	31.0 W
Method of access	slave Modbus TCP
Analogue output number	2
Supporting protocol for BACnet	false
Environmental class (during operation)	class 3S3 according to IEC 60721-3-3
Analogue input number	3
Number of inputs- potential-free	0
Transmission rate	4800 bps- 9600 bps- 19200 bps- 38.4 Kbps
Net weight	28.2 kg
Specific application	utility
Asynchronous motor control profile	constant torque standard
Supporting protocol for SUCONET	false
Maximum THDI	<48 % from 80...100 % of load conforming to IEC 61000-3-12
EMC filter	integrated with 150 m conforming to IEC 61800-3 category C3
With safety function Safe Stop 1 (SS1)	false
Operating position	vertical +/- 10 degree
Wattage	37kW
Permitted relative humidity (during storage)	class 1K5 according to EN 60721-3
Supporting protocol for KNX	false
Environmental class (during transport)	class 2S1 according to EN 60721-3-2
Base load current at low overload	74.5 A
With safety function Safe Direction (SDI)	false
Supplier Code	ATV630D37N4
Connection Type	RJ45
Network frequency	50...60 Hz
Vibration resistance	1 gn (f= 13-200 Hz) conforming to IEC 60068-2-6
With safety function Safe Operating Stop (SOS)	false
Supporting protocol for other bus systems	false
360Image	https://visuals.se.com/ATV630_FCD20220620A_360/20230420T0727/360
Network number of phases	3 phases
With safety function Safe Position (SP)	false
Analogue input type	AI2 voltage analog input: - 10...10 V DC- impedance: 31.5 kOhm- resolution 12 bits
Maximum acceleration under shock load (during transport)	150 m/s² at 11 ms
Degree of protection	UL type 1 conforming to UL 508C
IP degree of protection	IP21
Range	Altivar Process ATV600
Overvoltage category	III
Optical interface present	false
Number of inputs- bidirectional- not potential-free	0
Functionality	full
1 phase low current possible	false
Acceleration and deceleration ramps	linear adjustable separately from 0.01...9999 s
Nominal output power	37.0 kW
Phase	3 Phase
Base load current at high overload	61.5 A
Accuracy	+/- 1 % AO1- AO2 for a temperature variation 60 °C analog output
Supporting protocol for CAN	true
Voltage	380 - 480V AC
Maximum switching current	relay output R1- R2- R3 on inductive load- cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
Height	673mm
Number of HW interfaces serial RS485	1
Relay output type	configurable relay logic R2: sequence relay NO electrical durability 100000 cycles
Supporting protocol for PROFIBUS	true
Number of HW interfaces PROFINET	0
Type of cooling	forced convection
Maximum output frequency	500 kHz
Number of HW interfaces other	0
Discrete output number	0
Supporting protocol for PROFIsafe	false
Standards	IEC 61508
With safety function Safe programmable logic	false
Maximum acceleration under shock impact (during operation)	150 m/s² at 11 ms
Motor power hp	40 hp heavy duty
Number of HW interfaces industrial Ethernet	1
Isolation	between power and control terminals
Supporting protocol for MODBUS	true
Physical interface	2-wire RS 485
Speed drive output frequency	0.1-500 Hz
Maximum acceleration under shock load (during storage)	150 m/s² at 11 ms
Product or component type	variable speed drive