The EIB605TYC Photoelectric Smoke Alarm operates on the light scatter principle to detect smoke particles entering the optical chamber. This Photoelectric Smoke Alarm is sensitive to all domestic fire types but is especially sensitive to visible smouldering fires. The EIB605TYCRF supports wireless interconnection of up to 12 RadioLINK smoke alarms and 8 remote control devices. A unique housecoding feature prevents the system from communicating with other nearby RadioLINK systems. The EIB605TYC has a 10 Year Lithium battery that is non replaceable. The EIB605TYC is supplied with screw fixings with simple to install twist on base. The twist on action activates an internal switch and powers on the Alarm. The EIB605TYC is fitted with a large easy to use Test Button to facilitate frequent testing of the Alarm. The Test button can also be used to silence nuisance alarms, e.g. cooking fumes, for a 10 minute period. The sounder will automatically stop sounding when smoke particles are no longer present in the chamber. The EIB605TYC self-checks its chamber sensor, battery voltage and internal circuitry every 40 seconds. Any fault condition found will be indicated by a combination of Red LED flashes and/or sound beeps. Up to 12 battery powered smoke and heat Alarms may be linked using hardwire or RF connectivity. RadioLINK enabled smoke and/or heat alarms can be house coded as a system to prevent communication with other nearby RadioLINK systems. The Alarm is not powered until it is twisted onto the mounting base, thus avoiding battery power consumption during storage and prior to installation.

Features

High performance optical chamber
Powered for life lithium battery
Hardwire interconnection
Supplied with wireless interconnect RadioLINK module
Early detection to standard domestic fires
Large easy to use Test/Hush button
Silence nuisance/false alarms
Built in sounder - 85dB(A) at 3 metres
Alarm Fault warnings